Publications

BOOKS

M.H. Luxner:
“Modeling and Simulation of Highly Porous Open Cell Structures – Elasto-Plasticity and Localization versus Disorder and Defects.“;
VDI Verlag GmbH, Düsseldorf, 2006, ISBN 3-18-330818-5; 116 S.

C. Schuecker:
“Mechanism Based Modeling of Damage and Failure in Fiber Reinforced Polymer Laminates”;
VDI Verlag GmbH, Düsseldorf, 2006, ISBN: 3-18-330318-3; 128 S.

JOURNAL ARTICLES AND CONFERENCE PROCEEDINGS

LUXNER Engineering ZT GmbH in collaboration with the NASA Langley Research Center:
“Comparison of Damage Models for Predicting the Non-linear Response of Laminates Under Matrix Dominated Loading Conditions”

M.H. Luxner, H. E. Pettermann:
“Modeling and Simulation of Highly Porous Open Cell Structures – Elasto-Plasticity and Localization versus Disorder and Defects.“;
Mechanical Properties of Cellular Structures. IUTAM Bookseries, 12 (2009), S. 125 – 134.

M.H. Luxner, A. Woesz, J. Stampfl, H. E. Pettermann, P. Fratzl:
“A Finite Element Study on the Effects of Disorder in Cellular Structure“;
Acta Biomaterialia, 5 (2009), S. 381 – 390.

G. Wimmer, C. Schuecker, H. E. Pettermann:
“Numerical Simulation of Delamination in Laminated Composite Components – A Combination of a Strength Criterion and Fracture Mechanics “;
Composites Part B, 40 (2009), 2; S. 158 – 165.

C. Schuecker, C. G. Dávila, H. E. Pettermann:
” Modeling the non-linear response of fiber-reinforced laminates using a combined damage / plasticity model “;
Technical Report NASA/TM-2008-215314, NASA Langley Research Center, 2008.

C. Schuecker, H. E. Pettermann:
” Fiber Reinforced Laminates: Progressive Damage Modeling Based on Failure Mechanisms “;
Archives of Computational Methods in Engineering, 15 (2008), 2; S. 163 – 184.

C. Schuecker, H. E. Pettermann:
” Constitutive Ply Damage Modeling, FEM Implementation, and Analysis of Laminated Structures“;
Computers and Structures, 86 (2008), 9; S. 908 – 918.

C. Schuecker, H. E. Pettermann:
” Combining Elastic Brittle Damage with Plasticity to Model the Non-Linear Behavior of Fiber Reinforced Laminates “;
in: “Mechanical Response of Composites“, P.P. Camanho, C.G. Dávila, S.T. Pinho, J. Remmers (Hrg.); Springer-Verlag, Berlin, 2008, ISBN: 978-1-4020-8583-3, S. 99 – 117.

J. Stampfl, M.H. Luxner, H. E. Pettermann:
“Zellulare Werkstoffe mit frei wählbarer Zellgeometrie – Herstellung, Modellierung der mechanischen Eigenschaften und Anwendungen“;
Lignovisionen, 14 (2006), S. 55 – 60.

M.H. Luxner, T. Daxner, F. G. Rammerstorfer:
“Optimization of Mechanically Coupled Composite Pipes by Genetic Algorithms“;
Proceedings in Applied Mathematics and Mechanics, 4 (2004), 1; S. 620 – 621.

C. Schuecker, H. E. Pettermann:
” A Continuum Damage Model for Fiber Reinforced Laminates Based on Ply Failure Mechanisms “;
Composite Structures, 76 (2006), 1-2; S. 162 – 173.

C. Schuecker, D. H. Pahr, H. E. Pettermann:
” Accounting for Residual Stresses in FEM Analyses of Laminated Structures Using the Puck Criterion for Three-Axial Stress States “;
Composites Science and Technology, 66 (2006), 13; S. 2054 – 2062.

M.H. Luxner, J. Stampfl, H. E. Pettermann:
“Finite Element Modeling Concepts and Linear Analyses of 3D Regular Open Cell Structures“;
Journal of Materials Science, 40 (2005), 22; S. 5859 – 5866.

M.H. Luxner, J. Stampfl, H. E. Pettermann:
“Numerical simulations of 3D open cell structures – Influence of structural irregularities on elasto-plasticity and deformation localization“;
International Journal of Solids and Structures, 44 (2007), S. 2990-3003

M.H. Luxner, J. Stampfl, H. E. Pettermann:
“Linear and Nonlinear Numerical Investigations of Regular Open Cell Structures“;
Vortrag: 2004 ASME International Mechanical Engineering Congress and RD&D Expo, Anaheim, CA; 13.11.2004 – 20.11.2004; in: “Proceedings of the 2004 ASME International Mechanical Engineering Conference“, ASME, New York, (2004), ISBN 0-7918-4180-4; Paper-Nr. IMECE2004-62545.

M.H. Luxner, J. Stampfl, A. Woesz, P. Fratzl, H. E. Pettermann:
“Influence of Structural Disorder on the Performance of 3D Open Cell Structures“;
in: “Proceedings of the III European Conference on Computational Solids and Structural Mechanics“, herausgegeben von: ECCOMAS; Associção Portuguesa de Mecânica Teórica, Aplicada e Computacional, Lisboa, 2006, Paper-Nr. 1752, 15 S.

T. Daxner, M.H. Luxner, F. G. Rammerstorfer:
“Pre-Tensioned Belts Overhanging Elastic Rollers“;
PAMM, 5 (2005), 1; S. 649 – 650.

C. Schuecker, B. D. Davidson:
” Evaluation of the accuracy of the four-point bend End Notched Flexure test for Mode II delamination toughness determination “;
Composites Science and Technology, 60 (2000), 11; S. 2137 – 2146.

C. Schuecker, B. D. Davidson:
” Effect of friction on the perceived mode II delamination toughness from three- and four-point bend end-notched flexure tests “; in: “ Composite MAterials: Theory and Practice, ASTM STP 1383 “, P Grant and CQ Rousseau (eds.); Am. Soc. for Testing and MAterials, West Conshohocken, PA, S. 334 – 344.

PRESENTATIONS

LUXNER Engineering ZT GmbH
“Challenges for certifying aerospace structures”;
ESACOMP Users’ Metting 2011, Garching (Munich), Germany; April 14-15, 2011

M.H. Luxner:
“Numerische Simulation zellularer Materialien“;
Vortrag: 1. Wiener Biomaterialsymposium, Wien (eingeladen); 04.11.2004 – 05.11.2004.

M.H. Luxner, J. Stampfl, H. E. Pettermann:
“Nonlinear Behavior of 3D Regular and Irregular Open Cell Structures“;
Vortrag: Third M.I.T. Conference on Computational Fluid and Solid Mechanics, Cambridge, MA (eingeladen); 14.06.2005 – 17.06.2005.

M.H. Luxner, J. Stampfl, A. Woesz, P. Fratzl, H. E. Pettermann:
“Influence of Defects and Perturbations on the Performance of 3D Open Cell Structures“;
Vortrag: 3rd European Conference on Computational Mechanics (ECCM 2006), Lissabon; 05.06.2006 – 09.06.2006.

C. Schuecker, C. G. Dávila:
“ Simulating the non-linear response of fiber-reinforced laminates using a combined damage/plasticity model “;
Vortrag: International Conference on Computational & Experimental Engineering and Sciences (ICCES), Honolulu; 17.03.2008 – 22.03.2008.

C. Schuecker, H. E. Pettermann:
“ Combining Progressive Damage with Plasticity to Model the Non-linear Behavior of Fiber Reinforced Laminates “;
Vortrag: ECCOMAS Composites 2007, Porto; 12.09.2007 – 14.09.2007; in: “ECCOMAS Thematic Conference Mechanical Response of Composites“, P.P. Camanho, C.G. Dávila, S.T. Pinho, J. Remmers (Hrg.); ECCOMAS, Universidade do Porto (2007), Paper-Nr. 41, 14 S.

C. Schuecker, H. E. Pettermann:
“ A Mechanism Based Damage Meso-Model for Fiber Reinforced Laminates “;
Vortrag: Fifteenth Internacional Conference on Composite Materials (ICCM-15), Durban; 27.06.2005 – 01.07.2005; in: “Fifteenth International Conference on Composite Materials – Extended Abstracts“, V.E. Verijenko, S. Adali, E. Morosov, C.J. von Klemperer (Hrg.); (2005), S. 245 – 246.